Home Exam Pattern GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF, Exam Pattern

GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF, Exam Pattern

0

GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF & Download Exam Pattern: Are you searching for GPSC Assistant Motor Vehicle Inspector Syllabus? If Yes, You are in the right place. Gujarat Public Service Commission (GPSC) has officially released the Inspector & Assistant Inspector of Motor Vehicle Posts Recruitment. The candidates eagerly check and prepare for the examination. So, we provided the GPSC Assistant Motor Vehicle Inspector Syllabus 2021 to score more marks in the GPSC Assistant Motor Vehicle Inspector Exam. Not only the GPSC Assistant Motor Vehicle Inspector Syllabus pdf you can also get the GPSC Assistant Motor Vehicle Inspector Exam Pattern from this page. So, candidates can prepare for the GPSC Assistant Motor Vehicle Inspector Exam 2021 without any disturbance. To the bottom of this page, you can easily get the GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF & Exam Pattern for Subject Wise Syllabus in PDF Format. The candidates can use this article to get more marks and ideas about the examination.

Gpsc Assistant Motor Vehicle Inspector Syllabus 2021 Pdf
GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF

GPSC Assistant Motor Vehicle Inspector Syllabus 2021 – Overview

GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF & Download Exam Pattern
Organization Name Gujarat Public Service Commission (GPSC)
Post Name Inspector & Assistant Inspector of Motor Vehicle Posts
Category Syllabus
Syllabus Released
Job Location Gujarat
Official website gpsc.gujarat.gov.in

GPSC Exam Pattern 2021

GPSC Inspector Exam Pattern 2021

Paper Nature Of Exam Part Subject Marks Time Total Allotted Marks
Paper I Objective Part A Concerned Subjects 125 2 Hours 200
Part B Acts/ Rules/ Guideline/ Institute/ Judgements 75
Paper II Part A English 50 1 Hour 100
Part B Gujarati 50
Total 300
Personality Test 25
Grand Total 325

GPSC Assistant Motor Vehicle Inspector Exam Pattern 2021

Paper Nature Of Exam Part Subject Marks Duration
Paper I Objective Part A Concerned Subjects 125 3 Hours
Part B Acts/ Rules/ Guideline/ Institute/ Judgements 75
Part C Gujarati 50

GPSC Syllabus 2021

GPSC Inspector Syllabus 2021

Paper 1:

Part A: Concerned Subjects

MECHANICS OF SOLIDS:

  • Stress-strain relations, uniaxial loading, stress/strain tensor applied to a body subject to loads, thermal stress. Beams: Bending moment and shear force diagram, bending stresses and deflection of beams, shear stress distribution.
  • Design of solid and hollow circular shaft subjected to torque and combined loading for rigidity and stiffness; Design of Keys and splines.
  • Helical springs, combined stresses, Design of flywheels, leaf springs, thick and thin-walled pressure vessels, strain energy concepts and theories of failure.

ENGINEERING MATERIALS:

Basic concepts of the structure of solids, Crystalline materials, Defects in Crystalline material, alloy and binary phases diagrams, structural properties of common engineering materials, Heat treatment of steel, plastics, ceramics composite materials, common applications of various materials.

THEORY OF MACHINES:

  • Simple mechanism, kinematics and their classifications, link mechanism.
  • Inversion: Four bar chain mechanism, Flexible power transmission system, Geometrical configuration.
  • Gyroscope, cam profile, sound and vibrations of a mechanical system.
  • Balancing: Dynamic balancing, rotor balancing, etc. Balancing of single and multicylinder engines, linear vibration analysis of mechanical systems, Spring-MassDashpot system subject to axial load, Electrical analogy (single degree and two degrees of freedom). Automatic Controls, Analysis and design of sliding and rolling contact (anti-friction) bearings, Hydrodynamic bearings.

MANUFACTURING PROCESSES:

Conventional manufacturing processes like Turning, Welding, Shaping, Molding, Foundry Technology, Drilling etc. Merchant force analysis, Taylor’s tool life equation, machineability and machine economics, rigid small and flexible automation, NC, CNC. Recent machining methods – EDM, ECM and ultrasonic. Application of lasers and plasmas, analysis of forming processes. High energy rate forming jigs, fixtures, tools and gauges. Inspection of length, position, profile and surface finish, computer-aided manufacturing.

THERMODYNAMICS:
Basic concepts, open and closed systems, Application of thermodynamic laws, gas equations. Laws of Thermodynamics, First Law, Second law, Zeroth law Statement and Explanation. Gas Law: Boyle’s law, Charles’ law, Perfect gas equation, Thermodynamic cycles: Rankine cycle, Otto cycle, Diesel cycle, Dual cycle, Brayton cycle, etc.

IC ENGINES, FUELS AND COMBUSTION:
Spark Ignition and compression ignition engines. Four-stroke and two-stroke engines. Mechanical, thermal and volumetric efficiency. Heat balance, the Combustion process in SI and CI engine, Pre-ignition, detonation in SI engines. Diesel knocks in CI engines. Choice of engine fuels octane and Cetane rating. Alternate fuels, carburetion and fuel injection. Engine emission and control. Solid, liquid and gaseous fuels, stoichiometric air requirement and excess air factor, fuel gas analysis, higher and lower calorific values and their measurements.

DESIGN OF TRANSMISSION SYSTEMS:

  • Flexible transmission elements- design of flat belts & pulleys, design of chains and sprockets.
  • Gear transmission- speed ratios and number of teeth, force analysis, tooth stresses, dynamic effects, fatigue strength, factor safety, gear materials; Design of straight tooth spur gear and parallel axis helical gears based on strength and wear considerations. Straight bevel gear- tooth terminology, tooth forces and stresses, an equivalent number of teeth.
  • Worm gear, merits & demerits, terminology, thermal capacity, materials, forces & stresses, efficiency, estimating the size of worm gear pair.
  • Gearbox – geometric progression, standard step ratio; Ray diagram, kinematics layout; Design of sliding mesh gearbox- Design of multi-seed gearbox for machine tool applications; constant mesh gearbox, speed reducer unit; Variable speed gearbox; Fluid couplings, Torque converters for automotive applications.
  • Design of plate clutches, axial clutches, cone clutches, internal expanding rim clutches;
  • Electromagnetic clutches; Band and Block brakes, external shoe brakes, internal expanding shoe brakes.

HEAT TRANSFER, REFRIGERATION AND AIR CONDITIONING:

One and two-dimensional heat conduction, Heat transfer from extended surfaces, heat transfer by forced and free convection Heat exchangers. Fundamentals of diffusive and connective mass transfer. Radiation laws, heat exchange between black and non-black surfaces, Network analysis, Heat pump refrigeration cycles and systems, condensers, evaporators and expansion devices and controls. Properties and choice of refrigerant. Cooling load calculation, solar refrigeration.

AUTOMOBILE ENGINEERING:
Anatomy of vehicles, Automobile Systems – Necessity of clutch, Types of the clutch, Constructional and functional details of the clutch, Necessity of Transmission, Types of the Transmission system, Brake and suspension systems, control systems, conventional steering and power steering, Electrical systems- for starting, ignition and lighting, repairs and maintenance of automobiles.

COMPUTER-AIDED DESIGN AND COMPUTER-AIDED MANUFACTURING (CAD/CAM):

CAD work station, Graphic packages-types and features, Geometric modelling, Various CAD software, Introduction to CNC machines- constructional features and working. Automatic tool changer (ATC) and Automatic pallet changer (APC). CNC Part Programming.

POLLUTION AND VEHICLE INSURANCE
Exhaust gasses emission control systems. CNG conversion, Vehicle noise and its control. National and International standard norms for exhaust gas pollution control. PUC Certification. Licensing, Regulations of motor vehicles, Motor vehicle insurance.

DIAGNOSIS AND TESTING OF VEHICLE:
Testing of various elements of the vehicle systems-Battery, clutch, brakes, wheels and tyres (wheel alignment, wheel balancing), etc. Performance test

Part-B: Acts/Rules/Guideline/Institute/Judgements:
  1. The Motor Vehicle Act 1988 (with 2019 amendments)
  2. The Central Motor Vehicles Rules, 1989 (CMVR)
  • Chapter I: Preliminary
  • Chapter II: Licensing of Driving of Motor Vehicles
  • Chapter III: Registration of Motor Vehicles
  • Chapter IV: Control of Transport Vehicles
  • Chapter V: Construction Equipment & Maintenance of Motor Vehicle

3. THE GUJARAT MOTOR VEHICLES RULES, 1989

  • Chapter I: Preliminary
  • Chapter II: Licensing of Drivers of Motor Vehicles
  • Chapter III: Licensing of Conductors of Stage Carriages
  • Chapter IV: Registration of Motor Vehicles
  • Chapter V: Control of Transport Vehicles
  • Chapter VII: Construction Equipment & Maintenance of Motor Vehicle

4. Gujarat Road Safety Policy 2016-17
5. Motor Vehicle (Driving) Regulations, 2017
6. Gujarat Road Safety Authority Act 2018
7. Supreme Court Committee on Road Safety guidelines
8. National Green Tribunal
9. Traffic Signs, Road Markings and Road Furniture
10. Latest Technology in Vehicle Manufacturing related to Road Safety & Environment (including Bio Fuels)
11. Electric Vehicles
12. Landmark Judgement of Hon. Supreme Court related Road safety and Road and vehicle organisation

  • In the Supreme Court of India Civil Appeal no. 5826 of 2011 Mukund Dewangan vs the Oriental Insurance Co. Ltd. Etc… (Regarding No Necessity of obtaining endowments to drive the transport vehicles when the transport vehicle is class of light motor vehicles (LMV).)
  • In the Supreme Court of India write petition (Civil) No. 265 of 2011 Avishek Goenka vs Union of India & Anr.(Regarding Restriction of use of Black film on the vehicles)
  • In the Supreme Court of India write petition (Civil) No. 235 of 2012 Save life Foundation & Anr. vs Union of India & Anr. (Regarding No harassment to Samaritans i.e. bystanders for helping road accidents victim)
  • In the Supreme Court of India (Civil) appeal No. 11369 of 2018 Prakash Chand Doga vs Savita Sharma & Anr. (Regarding in accidents cases all the liabilities are of vehicles registered owner)
  • In the Supreme Court of India write petition (Civil) 510 of 2005 Maniderjit Singh Bitta vs Union of India & Anr. (Regarding Scheme regulating issuance and fixation of High-Security Registration Plates (HSRP))
  • In the Supreme Court of India write petition (Civil) No. 243 of 2005 Rajive Raturi vs Union of India & Others (Regarding For Divyang People safe access to road and transport facilities)

Paper 2

PART-A (ENGLISH)

  • Tenses , Concord- Participles, Gerund
  • Common Errors- on miscellaneous items
  • Usage: Articles, Prepositions, Adjective, Adverb, Conjunction, and Question tag
  • Usage: Some, many, any, little, a little, few, a few, since, for, modal Auxiliaries (can,
    may have to, ought to, must, should, would), Voice, Degree.
  • Vocabulary
  • Idioms Phrases
  • Spellings
  • Homonyms, Antonyms, Synonyms, One-word substitute, Words confused
  • Comprehension

Part-B (Gujarati)

  • Assassination
  • Sayings
  • Idioms
  • Synonyms
  • Opposite words
  • Joni
  • Ornament
  • Compound
  • Common or technical terms for phrases
  • Treaty
  • Rhyme

GPSC Assistant Motor Vehicle Inspector Syllabus 2021

Part A: Concerned Subjects

ENGINEERING DRAWING
Engineering Curves, orthographic and isometric projections, fasteners – Projection of Points, Lines & Planes, Limits Fits and Tolerances.

ENGINEERING MECHANICS
Centroid & centre of gravity, Coplanar concurrent forces, Coplanar parallel and nonconcurrent forces Friction, Rectilinear motion, Curvilinear motion- centripetal force, Work-Power-Energy, Simple machines.

THEORY OF MACHINES AND MACHINE DESIGN:
General consideration in Machine Design, Fundamental units, Derived units, Stress & Strain, Bearing Stress, Torsional & Bending stress, power transmission, flywheel and Governor, Frictional clutches and Brakes, Gears and Bearings, Balancing and Vibration.

NON CONVENTIONAL ENERGY SOURCES:
Renewable sources of Energy such as Hydro, Solar, Wind, Biomass, Tidal and Geo-Thermal Energy.

THERMODYNAMICS AND THERMAL ENGINEERING:
Basic concepts of Thermodynamics –first and second law of thermodynamics – thermodynamic cycles, fluid statics, kinematics and dynamics. Flow measurements, orifice and pipes, impact of jet, working of pumps, modes of heat transfer, fundamentals of refrigeration and air conditioning.

INTERNAL COMBUSTION ENGINES:
I C engines – part and their functions, I C engines – types and classification, types of fuels used in I C engines and their properties, Working of Petrol and Diesel engines, fuel injection systems – for Petrol, Diesel, LPG and CNG, MPFI, Cooling & lubricating system of IC engine, Combustion Process, performance test on IC engine, Eco-friendly fuels-conventional, LPG, CNG, Biofuel

MATERIALS AND MANUFACTURING ENGINEERING:
Engineering Materials, Heat treatment processes, Metalworking, metal casting and metal joining processes, basic machine tools.
Conventional manufacturing processes like Turning, Welding, Shaping, Molding, Foundry Technology, Drilling etc.

AUTOMOBILE ENGINEERING:
Anatomy of vehicles, Automobile Systems – Necessity of clutch, Types of the clutch, Constructional and functional details of the clutch, Necessity of Transmission, Types of the Transmission system, Brake and suspension systems, control systems, conventional steering and power steering, Electrical systems- for starting, ignition and lighting, repairs and maintenance of automobiles.

COMPUTER-AIDED DESIGN AND COMPUTER AIDED MANUFACTURING (CAD/CAM):
CAD work station, Graphic packages-types and features, Geometric modelling, Various CAD software, Introduction to CNC machines- constructional features and working. Automatic tool changer (ATC) and Automatic pallet changer (APC). CNC Part Programming.

POLLUTION AND VEHICLE INSURANCE:
Exhaust gasses emission control systems. CNG conversion, Vehicle noise and its control. National and International standard norms for exhaust gas pollution control. PUC Certification. Licensing, Regulations of motor vehicles, Motor vehicle insurance

DIAGNOSIS AND TESTING OF VEHICLE:
Testing of various elements of the vehicle systems-Battery, clutch, brakes, wheels and tyres (wheel alignment, wheel balancing), etc. Performance test.

Part-B: Acts/Rules/Guideline/Institute/Judgements

  1. The Motor Vehicle Act 1988 (with 2019 amendments)
  2. The Central Motor Vehicles Rules, 1989 (CMVR)
     Chapter I: Preliminary
     Chapter II: Licensing of Driving of Motor Vehicles
     Chapter III: Registration of Motor Vehicles
     Chapter IV: Control of Transport Vehicles
     Chapter V: Construction Equipment & Maintenance of Motor Vehicle
  3. THE GUJARAT MOTOR VEHICLES RULES, 1989
     Chapter I: Preliminary
     Chapter II: Licensing of Drivers of Motor Vehicles
     Chapter III: Licensing of Conductors of Stage Carriages
     Chapter IV: Registration of Motor Vehicles
     Chapter V: Control of Transport Vehicles
     Chapter VII: Construction Equipment & Maintenance of Motor Vehicle
  4. Gujarat Road Safety Policy 2016-17
  5. Motor Vehicle (Driving) Regulations, 2017
  6. Gujarat Road Safety Authority Act 2018
  7. Supreme Court Committee on Road Safety guidelines
  8. National Green Tribunal
  9. Traffic Signs, Road Markings and Road Furniture
  10. Latest Technology in Vehicle Manufacturing related to Road Safety & Environment (including Bio Fuels)
  11. Electric Vehicles
  12. Landmark Judgement of Hon. Supreme Court related Road safety and Road and
    vehicle organisation:
  • In the Supreme Court of India Civil Appeal no. 5826 of 2011 Mukund Dewangan vs the Oriental Insurance Co. Ltd. Etc… (Regarding No Necessity of obtaining endowments to drive the transport vehicles when the transport vehicle is class of light motor vehicles (LMV).)
  • In the Supreme Court of India write petition (Civil) No. 265 of 2011 Avishek Goenka vs Union of India & Anr. (Regarding Restriction of use of Black film on the vehicles)
  • In the Supreme Court of India write petition (Civil) No. 235 of 2012 Save life Foundation & Anr. Vs Union of India & Anr. (Regarding No harassment to Samaritans i.e. bystanders for helping road accidents victim)
  • In the Supreme Court of India (Civil) appeal No. 11369 of 2018 Prakash Chand Doga vs Savita Sharma & Anr. (Regarding in accidents cases all the liabilities are of vehicles registered owner)
  • In the Supreme Court of India writ petition (Civil) 510 of 2005 Maniderjit Singh Bitta vs Union of India & Anr. (Regarding Scheme regulating issuance and fixation of High-Security Registration Plates (HSRP))
  • In the Supreme Court of India write petition (Civil) No. 243 of 2005 Rajive Raturi vs Union of India & Others (Regarding For Divyang People safe access to road and transport
    facilities)

Part-C (Gujarati):

  • Assassination
  • Sayings
  • Idioms
  • Synonyms
  • Opposite words
  • Joni
  • Ornament
  • Compound
  • Common or technical terms for phrases
  • Treaty
  • Rhyme

Download GPSC Inspector Syllabus 2021 PDF

Download GPSC Assistant Motor Vehicle Inspector Syllabus 2021 PDF

Official website

Candidates keep in touch with the TAMILANJOBS website for more information regarding Jobs, Exams, results and other details.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

DMCA.com Protection Status